edge-vlan

bridge

Enables the edge VLAN mode. In the edge VLAN mode, a protected port does not forward traffic to another protected port on the same wireless controller or service platform. This feature is enabled by default.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

edge-vlan

Parameters

None

Example

nx9500-6C8809(config-profile default-ap505-bridge-vlan-1)#edge-vlan
nx9500-6C8809(config-profile default-ap505-bridge-vlan-1)#

Related Commands


no	Disables the edge VLAN mode