geo-coordinates

Device Config Commands

Configures the geographic coordinates for this device. Specifies the exact location of this device in terms of latitude and longitude coordinates.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

geographic coordinates <-90.0000-90.0000> <-180.0000-180.0000>

Parameters

geographic coordinates <-90.0000-90.0000> <-180.0000-180.0000>


geographic coordinates	Configures the geographic coordinates for this device <-90.0000-90.0000> – Specify the device‘s latitude coordinate from -90.0000 to 90.0000. When looking at a floor map, latitude lines specify the east-west position of a point on the Earth's surface. <-180.0000-180.0000> – Specify the device‘s longitude coordinate from -180.0000 to 180.0000. When looking at a floor map, longitude lines specify the north-south position of a point on the Earth's surface.

Example

nx9500-6C8809(config-device-B4-C7-99-6C-88-09)#geo-coordinates -90.0000 166.0000

nx9500-6C8809(config-device-B4-C7-99-6C-88-09)#show context
nx9000 B4-C7-99-6C-88-09
 use profile default-nx9000
 use rf-domain default
 hostname nx9500-6C8809
 geo-coordinates -90.0000 166.0000
 license AP DEFAULT-6AP-LICENSE
 license ADSEC DEFAULT-ADV-SEC-LICENSE
 ip default-gateway 192.168.13.2
 ip default-gateway priority static-route 20
 interface ge1
  switchport mode access
  switchport access vlan 1
 interface vlan1
  ip address 192.168.13.9/24
  ip address 192.168.0.1/24 secondary
  ip dhcp client request options all
 use client-identity-group ClientIdentityGroup
 logging on
 logging console warnings
 logging buffered warnings
nx9500-6C8809(config-device-B4-C7-99-6C-88-09)#

Related Commands


no	Removes device‘s geographic coordinates