Turns on and off access point LEDs
led {flash-pattern}
| led flash-pattern | Optional. Enables LED flashing on the device using this profile Select this option to flash an access point‘s LEDs in a distinct manner (different from its operational LED behavior). Enabling this feature allows an administrator to validate an access point has received its configuration (perhaps remotely at the site of deployment) without having to log into the managing controller or service platform. This feature is disabled by default. |
nx9500-6C8809(config-profile-TestAP8533)#led flash-pattern nx9500-6C8809(config-profile-TestAP8533)#show context profile ap8533 TestAP8533 no autoinstall configuration no autoinstall firmware led flash-pattern crypto ikev1 policy ikev1-default isakmp-proposal default encryption aes-256 group 2 hash sha crypto ikev2 policy ikev2-default isakmp-proposal default encryption aes-256 group 2 hash sha crypto ipsec transform-set default esp-aes-256 esp-sha-hmac crypto ikev1 remote-vpn crypto ikev2 remote-vpn crypto auto-ipsec-secure --More-- nx9500-6C8809(config-profile-TestAP8533)#
| no | Disables or reverts settings to their default |