Profiles are sort of a ‘template‘ representation of configuration. The system has:
a default profile for each of the following service platforms:
a default profile for each of the following access points:
You can modify a default profile. In the following example, an IP address is assigned to the management port on the default AP505 profile.
nx9500-6C8809(config)#profile ap505 default-ap505 nx9500-6C8809(config-profile-default-ap505)#interface me1 nx9500-6C8809(config-profile-default-ap505-if-me1)#ip address 172.16.10.2/24 nx9500-6C8809(config-profile-default-ap505-if-me1)#commit nx9500-6C8809(config-profile-default-ap505)#exit nx9500-6C8809(config)#
The following command displays a default ap505 profile configuration:
nx9500-6C8809(config-profile-default-ap505)# nx9500-6C8809(config-profile-default-ap505)#show context profile ap505 default-ap505 no autoinstall configuration no autoinstall firmware crypto ikev1 policy ikev1-default isakmp-proposal default encryption aes-256 group 2 hash sha crypto ikev2 policy ikev2-default isakmp-proposal default encryption aes-256 group 2 hash sha crypto ipsec transform-set default esp-aes-256 esp-sha-hmac crypto ikev1 remote-vpn crypto ikev2 remote-vpn crypto auto-ipsec-secure crypto load-management crypto remote-vpn-client interface radio1 interface radio2 interface bluetooth1 shutdown mode le-sensor interface ge1 interface ge2 interface pppoe1 use firewall-policy default service pm sys-restart --More-- nx9500-6C8809(config-profile-default-ap505) #