bootfile (dhcpv4-pool-config)

The Bootfile command provides a diskless node path to the image file while booting up. Only one file can be configured for each DHCP pool.

For more information on the BOOTP protocol with reference to the DHCP policy, see bootp bootp (dhcpv4-server-policy-config).

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

bootfile <IMAGE-FILE-PATH>

Parameters

bootfile <IMAGE-FILE-PATH>


<IMAGE-FILE-PATH>	Sets the path to the boot image for BOOTP clients. The file name can contain letters, numbers, dots and hyphens. Consecutive dots and hyphens are not permitted.

Examples

nx9500-6C8809(config-dhcp-policy-test-pool-testPool)#bootfile test.txt

nx9500-6C8809(config-dhcp-policy-test-pool-testPool)#show context
 dhcp-pool testPool
  address 192.168.13.4 class dhcpclass1
  bootfile test.txt
nx9500-6C8809(config-dhcp-policy-test-pool-testPool)#

Related Commands


no	Resets the boot image path for the BOOTP clients
bootp (dhcpv4-server-policy-config)	Configures BOOTP protocol parameters