lldp
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h,
AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Parameters
lldp [receive|transmit]
| receive |
Enables LLDP
PDUs (Protocol Data Units) snooping. When enabled, the port
receives periodic updates from a multicast address informing about presence
of neighbors. This option is enabled by default. |
| transmit |
Enables LLDP PDU
transmission. When enabled, the port sends out periodic interface updates to
a multicast address to advertise its presence to neighbors. This option is
enabled by default. |
Example
nx9500-6C8809(config-profile-testnx5500-if-ge1)#lldp transmit
Related Commands
| no |
Disables or reverts interface settings to their default |
