svp-prioritization
Enables WLAN SVP support on this WLAN QoS policy. SVP
support enables the identification and prioritization of traffic from Spectralink/Ploycomm
phones. This gives priority to voice, with voice management packets supported only on
certain legacy VOIP phones. If the wireless client classification is WMM, non-WMM devices
recognized as voice devices have all their traffic transmitted at voice priority. Devices
are classified as voice, when they emit SIP, SCCP, or H323 traffic. Thus, selecting this
option has no effect on devices supporting WMM..This feature is
enabled by default.
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h,
AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
svp-prioritization
Examples
nx9500-6C8809(config-wlan-qos-test)#svp-prioritization
nx9500-6C8809(config-wlan-qos-test)#show context
wlan-qos-policy test
classification non-wmm video
svp-prioritization
multicast-mask primary 11-22-33-44-55-66/22-33-44-55-66-77
classification non-unicast normal
rate-limit wlan from-air rate 55
rate-limit wlan from-air max-burst-size 6
rate-limit wlan from-air red-threshold best-effort 10
rate-limit client from-air red-threshold background 3
qos trust dscp
qos trust wmm
accelerated-multicast autodetect classification voice
nx9500-6C8809(config-wlan-qos-test)#