wep64
Configures WEP64 parameters
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h,
AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
wep64 [key|keys-from-passkey|transmit-key]
wep64 key <1-4> [ascii|hex] [0 <WORD>|2 <WORD>|<WORD>]
wep64 keys-from-passkey <WORD>
wep64 transmit-key <1-4>
Parameters
wep64 key <1-4> [ascii|hex] [0 <WORD>|2 <WORD>|<WORD>]
| wep64 |
Configures WEP64 parameters The parameters are: key, key-from-passkey,
and transmit-key.
|
| key <1-4>] |
Configures pre-shared hex keys
- <1-4> –
Configures a maximum of four key indexes. Select a key index from 1 -
4.
|
| ascii [0 <WORD>| 2 <WORD>|<WORD>] |
Sets keys as ASCII characters (5 characters for WEP64, 13 for WEP128)
- 0 <WORD> –
Configures a clear text key
- 2 <WORD> –
Configures an encrypted key
- <WORD> –
Configures key (10 hex or 5 ASCII characters for WEP64, 26 hex or 13
ASCII characters for WEP128).
|
| hex [0 <WORD>| 2 <WORD>|<WORD>] |
Sets keys as hexadecimal characters (10 characters for WEP64, 26 for
WEP128)
- 0 <WORD> –
Configures a clear text key
- 2 <WORD> –
Configures an encrypted key
- <WORD> –
Configures the key (10 hex or 5 ASCII characters for WEP64, 26 hex or
13 ASCII characters for WEP128)
|
wep64 keys-from-passkey <WORD>
| keys-from-passkey <WORD> |
Specifies a pass key from which keys are derived
- <WORD> – Specify
a pass key from 4 - 32 characters.
|
wep64 transmit-key <1-4>
| transmit-key <1-4> |
Configures the key index used for transmission from an AP to a wireless
client or service platform
- <1-4> – Specify
a key index from 1 - 4.
|
Examples
NOC-NX9500(config-wlan-test2)#wep64 key 1 hex 1CBF427D50
NOC-NX9500(config-wlan-test2)#wep64 transmit-key 1
NOC-NX9500(config-wlan-test2)#show context
wlan test2
ssid test2
bridging-mode local
encryption-type none
authentication-type none
wep64 key 1 hex 0 1CBF427D50
NOC-NX9500(config-wlan-test2)#
