dpi
Displays Deep Packet Inspection
(DPI) statistics for all configured and canned applications. DPI is an advanced packet
analysis technique, which analyzes packet and packet content headers to determine the nature
of network traffic. When DPI is enabled, packets of all flows are subjected to DPI to get
accurate results. DPI identifies applications (such as, Netflix, Twitter, Facebook, etc.) and
also extracts metadata (such as, host name, server name, TCP-RTT, etc.) for further use by the
WiNG firewall.Note
The
show > dpi command
returns results only if executed on a device that supports DPI and has DPI logging enabled.
DPI logging can be enabled either on the device or on the profile applied to the device. For
more information, see
dpi (profile config mode).
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h,
AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Syntax
show dpi [app|per-purview-category|purview-app-category|purview-application|
purview-application-policy]
show dpi app [stats|wireless-clients|wlan]
show dpi app stats [<APPLICATION-NAME>|all] {on <DEVICE-OR-DOMAIN-NAME>}
show dpi app wireless-clients stats <MAC> {on <DEVICE-OR-DOMAIN-NAME>}
show dpi app wlan stats [<WLAN-NAME>|all] on <RF-DOMAIN-NAME>
show dpi per-purview-category stats <PURVIEW-APP-CATEGORY-NAME>
[bytes-in|bytes-out|total-bytes] {on <DEVICE-OR-DOMAIN-NAME>}
show dpi purview-application brief
show dpi purview-application-policy stats <PURVIEW-APP-POLICY-NAME>
{on <DEVICE-NAME>}
Parameters
show dpi app wireless-clients stats <MAC> {<DEVICE-OR-DOMAIN-NAME>}
dpi app wireless-clients <MAC> |
Displays application-usage statistics for all wireless clients or a specified
wireless client |
on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays application-usage stats for wireless clients associated with
a specified device or within a specified RF Domain
- <DEVICE-OR-DOMAIN-NAME>
– Specify the name of the access point, wireless controller, service platform,
or RF Domain.
Note: If you specify an access point name, the application usage stats for
wireless clients associated with the specified AP is displayed. In case of an RF
Domain, application usage stats for all wireless clients associated with APs
within the specified RF Domain is displayed.
|
show dpi app stats [<APPLICATION-NAME>|all] {on <DEVICE-OR-DOMAIN-NAME>}
dpi app stats |
Displays statistics for an application or application category
- app – Displays statistics for a
specified application or all applications
Note: The applications are the
RF Domain member allowed applications whose data (bytes) are passing through the
WiNG 7.X.X managed network.
|
[<APPLICATION-NAME>|all] |
This parameter is common to the ‘app‘ and ‘app-category‘
keywords.
- <APPLICATION-NAME> –
Displays statistics for a specified application
- all – Displays statistics for
all applications
|
on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays statistical data on a specified
device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the name of the access point, wireless
controller, service platform, or RF Domain.
|
show dpi app wlan stats [<WLAN-NAME>|all] on <RF-DOMAIN-NAME>
dpi app wlan stats [<WLAN-NAME>|all] |
Displays application-usage statistics for all wireless clients associating with
a specified network or all networks
- <WLAN-NAME> – Displays application usage stats for a specified wireless
network.
- all - Displays application usage stats for all wireless networks configured
within the system.
|
on <RF-DOMAIN-NAME> |
Optional. Displays application-usage stats for wireless clients within a
specified RF Domain
- <RF-DOMAIN-NAME> – Specify the name of the RF Domain.
|
show dpi purview-application-policy stats <PURVIEW-APP-POLICY-NAME>
{on <DEVICE-NAME>}
dpi purview-application-policy stats |
Displays statistics for an existing Purview application policy |
<PURVIEW-APP-POLICY-NAME> |
Displays statistics for a specified Purview application-policy. Specify the
policy name. |
on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays Purview application-policy related statistical data on a
specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> –
Specify the name of the access point, wireless controller, service platform, or
RF Domain.
|
show dpi purview-application brief
dpi purview-application brief |
Displays a brief summary of purview-applications their status and
configuration |
show dpi per-purview-category stats <PURVIEW-APP-CATEGORY-NAME>
[bytes-in|bytes-out|total-bytes] {on <DEVICE-OR-DOMAIN-NAME>}
dpi per-purview-category stats |
Displays statistics for the top ten applications based on the application
category and the Sort ID specified. The Sort ID options are: bytes-in, bytes-out or
total-bytes. |
<PURVIEW-APP-CATEGORY-NAME> |
Specify the Purview application category name. The system displays statistics
for the top ten applications in this category. |
[bytes-in|bytes-out| total-bytes] |
Filters and displays statistical data for the top ten utilized applications in
respect to the following:
- bytes-in – Displays total data bytes uploaded through the controller managed
network. If this application data is not aligned with application utilization
expectations, consider allowing or denying additional applications and
categories or adjusting their precedence (priority).
- bytes-out – Displays total data bytes downloaded through the controller
managed network. If this application data is not aligned with application
utilization expectations, consider allowing or denying additional applications
and categories or adjusting their precedence (priority).
- total-bytes – Displays total data bytes (uploaded and downloaded) through the
controller managed network. These are only the administrator allowed
applications approved for proliferation within the managed network.
|
on <DEVICE-OR-DOMAIN-NAME> |
Optional. Displays statistical data on a specified device or RF Domain
- <DEVICE-OR-DOMAIN-NAME> – Specify the name of the access point, wireless
controller, service platform, or RF Domain.
|
Examples
ap560-135433#show dpi app stats all
------------------------------------------------------------------------------------
APPLICATION BYTES_UPLOADED BYTES_DOWNLOADED NUM_FLOWS
------------------------------------------------------------------------------------
SSDP 864 0 1
LLMNR 396 0 10
Google 91.253 KB 306.998 KB 20
Taboola 8.516 KB 30.384 KB 1
AppNexus 1.087 KB 3.394 KB 1
Yahoo_Ads 7.753 KB 33.404 KB 5
Google_Ads 30.101 KB 30.914 KB 3
ndtv-custom 16.754 KB 164.662 KB 2
Encrypted_Web 12.610 KB 367.589 KB 1
Google_Analytics 11.473 KB 38.588 KB 4
-------------------------------------------------------------------------------------
ap560-135433#
ap560-135433#show dpi app wireless-client stats
========== Wireless Client 60-67-20-A8-26-28 Application Statistics ==========
--------------------------------------------------------------------------------
APPLICATION BYTES_UPLOADED BYTES_DOWNLOADED NUM_FLOWS
--------------------------------------------------------------------------------
Unknown 139.050 KB 999.103 KB 79
AddThis 0 0 521
Adobe_Ads 0 0 6
Aggregate_Knowledge 0 0 4
--------------------------------------------------------------------------------
ap560-135433#
ap560-135433#show dpi app wlan stats 560-libdpi on remote
========== Wlan 560-libdpi Application Statistics ==========
------------------------------------------------------------------------------
APPLICATION BYTES_UPLOADED BYTES_DOWNLOADED
------------------------------------------------------------------------------
AddThis 0 0
Adobe_Ads 0 0
Aggregate_Knowledge 0 0
Akamai 0 0
Amazon_Web_Services 0 0
Aol_Advertising 0 0
AppNexus 0 0
------------------------------------------------------------------------------
ap560-135433#