channel-list

Assigns a list of channels, for the selected frequency, used in Smart RF scans

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

channel-list [2.4GHz|5GHz] <WORD>

Parameters

• channel-list [2.4GHz|5GHz] <WORD>


2.4GHz <WORD>	Assigns a channel list for the 2.4 GHz band <WORD> – Specify a comma separated list of channels
5GHz <WORD>	Assigns a channel list for the 5.0 GHz band <WORD> – Specify a comma separated list of channels

Examples

nx9500-6C8809(config-smart-rf-policy-test)#channel-list 2.4GHz 1,12

nx9500-6C8809(config-smart-rf-policy-test)#show context
smart-rf-policy test
 assignable-power 2.4GHz max 20
 assignable-power 2.4GHz min 8
 channel-list 2.4GHz 1,12
 area test channel-list 2.4GHz 1,2,3
 avoidance-time dfs 300
nx9500-6C8809(config-smart-rf-policy-test)#

Related Commands


no (smart-rf-policy-config-mode-command)	Removes the channel list for the selected frequency