crypto

Associates an existing and configured VPN crypto map with this VLAN interface.

Crypto map entries are sets of configuration parameters for encrypting packets that pass through the VPN tunnel. For more information on crypto maps, see crypto-map-config-commands.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

crypto map <CRYPTO-MAP-NAME>

Parameters

crypto map <CRYPTO-MAP-NAME>


map <CRYPTO-MAP-NAME>	Attaches a crypto map to the selected VLAN interface. The crypto map should be existing and configured. <CRYPTO-MAP-NAME> – Specify the crypto map name.

Example

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#crypto map map1

nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#show context
 interface vlan8
  crypto map map1
nx9500-6C8809(config-profile-default-nx5500-if-vlan8)#

Related Commands


no	Disables or reverts interface VLAN settings to their default