shutdown

interface-config-bluetooth-instance

Shutsdown the selected Bluetooth radio interface

Note

The no → shutdown command enables the BLE interface.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP505i, AP510i/e, AP560i/h, AP7612, AP7632, AP7662, AP8432, AP8533

Syntax

shutdown

Parameters

None

Example

nx9500-6C8809(config-profile-default-ap8432-if-bluetooth1)#shutdown

nx9500-6C8809(config-profile-default-ap8432-if-bluetooth1)#show context
 interface bluetooth1
  shutdown
  mode le-beacon
  beacon pattern ibeacon
  ibeacon calibration-rssi -70
  ibeacon major 1110
  ibeacon minor 2210
  ibeacon uuid f2468da65fa82e841134bc5b71e0893e
nx9500-6C8809(config-profile-default-ap8432-if-bluetooth1)#

ap510-133A75#(config-device-94-9B-2C-13-3A-75-if-bluetooth1)#no shutdown

For AP5XX IoT configuration, see Configurations enabling IoT on AP5XX IoT.

Related Commands


no (bluetooth-inf-config-command)	Reverses shutdown