cdp
Supported in the following platforms:
- Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h,
AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
- Service Platforms
— NX5500, NX7500, NX9500, NX9600, VX9000
Parameters
cdp [receive|transmit]
| receive |
Enables CDP
packet snooping on this interface. When enabled, the port receives periodic
interface updates from a multicast address. This option is enabled by
default. |
| transmit |
Enables CDP
packet transmission on this interface. When enabled, the port sends out
periodic interface updates to a multicast address to advertise its presence
to neighbors. This option is enabled by default. |
Example
nx9500-6C8809(config-profile-testnx5500-if-ge1)#cdp transmit
Related Commands
| no |
Disables CDP packet snooping on the controller or service platform‘s selected GE ports |
