use (meshpoint-config)

Uses a Quality of Service (QoS) policy defined specifically for meshpoints. To use this QoS policy, it must be defined.

Supported on the following platforms:

Access Points — AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533

Syntax

use [aaa-policy <AAA-POLICY-NAME>|meshpoint-qos-policy <MESHPOINT-QOS-POLICY-NAME>]

Parameters

use [aaa-policy <AAA-POLICY-NAME>|meshpoint-qos-policy <MESHPOINT-QOS-POLICY-NAME>]


meshpoint-qos-policy <MESHPOINT-QOS-POLICY-NAME>	Configures this meshpoint to use a predefined meshpoint QoS policy <MESHPOINT-QOS-POLICY-NAME> – Specify the meshpoint QoS policy name (should be existing and configured).
aaa-policy <AAA-POLICY-NAME>	Configures this meshpoint to use a predefined aaa-policy <AAA-POLICY-NAME> – Specify the aaa-policy name (should be existing and configured).

Examples

nx9500-6C8809(config-meshpoint-test)#use meshpoint-qos-policy test

nx9500-6C8809(config-meshpoint-test)#show context
meshpoint test
 description "This is an example of a meshpoint description"
 meshid TestingMeshPoint
 shutdown
 beacon-format mesh-point
 control-vlan 1
 allowed-vlans 1,10-16,18-23
 neighbor inactivity-timeout 300
 data-rates 2.4GHz bgn
 data-rates 5GHz an
 security-mode psk
 root
 use meshpoint-qos-policy test
nx9500-6C8809(config-meshpoint-test)#

Related Commands


no (meshpoint-config)	Removes the meshpoint QoS policy associated with this meshpoint
meshpoint-qos-policy-config-instance	Creates and configures a meshpoint QoS policy
AAA Policy	Creates and configures an AAA policy