crypto-ikev1/ikev2-peer commands
Configures a IKEv1/IKEV2 peer‘s remote identity. This remote identifier is used with this peer configuration for an IKE exchange with the target VPN IPSec peer.
remoteid [address <IP>|dn <WORD>|email <WORD>|fqdn <WORD>|string <WORD>]
remoteid [address <IP>|dn <WORD>|email <WORD>|fqdn <WORD>|string <WORD>
| address <IP> | Configures the remote IKEv1/IKEV2 peer‘s IP address. The IP address is used as the peer‘s remote identity. |
| dn <WORD> | Configures the remote peer‘s distinguished name. For example, "C=us ST=<state> L=<location> O=<organization> OU=<org unit>". The maximum length is 128 characters. |
| email <WORD> | Configures the remote peer‘s e-mail address. The maximum length is 128 characters. |
| fqdn <WORD> | Configures a peer‘s FQDN. The maximum length is 128 characters. |
| string <WORD> | Configures a peer‘s identity string. The maximum length is 128 characters. |
nx9500-6C8809(config-profile-default-ap8533-ikev1-peer-peer1)#remoteid dn SanJose nx9500-6C8809(config-profile-default-ap8533-ikev1-peer-peer1)#show context crypto ikev1 peer peer1 ip address 172.16.10.12 remoteid dn SanJose localid email bob@examplecompany.com nx9500-6C8809(config-profile-default-ap8533-ikev1-peer-peer1)# nx9500-6C8809(config-profile-default-ap8533-ikev1-peer-peer1)#remoteid address 157.235.209.63 nx9500-6C8809(config-profile-default-ap8533-ikev2-peer-peer1)#show context crypto ikev2 peer peer1 remoteid address 157.235.209.63 nx9500-6C8809(config-profile-default-ap8533-ikev2-peer-peer1)#