server-host

Configures the ExtremeLocation server‘s hostname. When configured, the WiNG controller stages the Tenant‘s site hierarchy information to the specified server.

Supported in the following platforms:

Access Points — AP410i/e AP460i/e, AP505i, AP510i/e, AP560i/h, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

server-host 1 ip <HOSTNAME> {port <1-65535>}

Parameters

server-host 1 ip <HOSTNAME> {port <1-65535>}


server-host 1 ip <HOSTNAME>	Identifies the ExtremeLocation server by its hostname <HOSTNAME> – Enter ExtremeLocation server‘s hostname. Note: Enter the server‘s hostname and not the IP address, as the IP address is likely to change periodically in order to balance load across multiple Location server instances.
{port <1-65535>}	optional. Configures the port on which the ExtremeLocation server is reachable <1-63335> – Selects a port from 1 - 65535 for the ExtremeLocation server. Note: By default the ExtremeLocation server is reachable on port 443.

Examples

nx9500-6C8809(config-location-policy-ELocPolicy)#server-host 1 ip xyz.com

nx9500-6C8809(config-location-policy-ELocPolicy)#show context
location-policy ELocPolicy
 enable
 server-host 1 ip xyz.com port 443
 location-key dGVzdEAxMjM0NQo
nx9500-6C8809(config-location-policy-ELocPolicy)#

Related Commands


no (location-policy-config-commands)	Removes ExtremeLocation server's hostname from the policy