Wireless Controller, Service Platform and Access Point CLI Reference Guide

Configures the connection capability element in this passpoint policy. When configured, it communicates which ports are open or closed on the Hotspot, in response to an ANQP query.

Supported in the following platforms:

Access Points — AP310i/e, AP410i/e, AP460i/e, AP560i/h, AP510i/e, AP505i, AP7522, AP7532, AP7562, AP7612, AP7632, AP7662, AP8432, AP8533
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

connection-capability [ftp|http|icmp|ip-protocol|ipsec-vpn|pptp-vpn|sip|ssh|tls-vpn]

connection-capability [ftp|http|icmp|ipsec-vpn|pptp-vpn|sip|ssh|tls-vpn] [closed|open|unknown]

connection-capability ip-protocol <0-255> port <0-65535> [closed|open|unknown]

Parameters

connection-capability [ftp|http|icmp|ip-protocol|ipsec-vpn|pptp-vpn|sip|ssh|tls-vpn]


connection-capability	Configures the connection capability element in this passpoint policy
ftp	Specifies the protocol type as FTP. Configures TCP port 20.
http	Specifies the protocol type as HTTP. Configures TCP port 80.
icmp	Specifies the protocol type as ICMP
ipsec-vpn	Specifies the protocol type as IPSEC VPN. Configures ESP and UDP ports 500 and 4500.
pptp-vpn	Specifies the protocol type as PPTP VPN. Configures TCP port 1723.
sip	Specifies the protocol type as SIP. Configures TCP port 5060 and UDP port 5060.
ssh	Specifies the protocol type as SSH. Configures TCP port 20
tls-vpn	Specifies the protocol type as TLS VPN. Configures TCP port 443.
port <0-65535> [closed\|open\|unknown	After specifying the protocol type, specify the port (associated with the selected protocol) and its status. closed – Specifies that the port(s) is/are closed open – Specifies that the port(s) is/are open unknown – Specifies that the port(s) status is not known Note: When the connection capability element is not configured, the hotspot does not return the element in an ANQP capability request and ignores any ANQP query for the element.

connection-capability ip-protocol <0-255> port <0-65535> [closed|open|unknown]


connection-capability	Configures the connection capability element in this passpoint policy
ip-protocol <0-255>	Identifies the IP protocol by the protocol‘s number. For example, for simple message protocol (SMP) specify 121.
port <0-65535> [closed\|open\|unknown]	After specifying the IP protocol type, specify the port number. port <0-65535> – Select a port for the IP protocol identified. After specifying the port number, specify the port status. closed – Specifies that the port(s) is/are closed open – Specifies that the port(s) is/are open unknown – Specifies that the port(s) status is not known Note: When the connection capability element is not configured, the hotspot does not return the element in an ANQP capability request and ignores any ANQP query for the element.

Examples

nx9500-6C8809(config-passpoint-policy-test)#connection-capability 1 ip-protocol 2 port 10 closed

nx9500-6C8809(config-passpoint-policy-test)#show context
hotspot2-policy test
 access-network-type chargeable-public
 connection-capability ip-protocol 2 port 10 closed
 3gpp mcc 310 mnc 970
 3gpp mcc 505 mnc 14
nx9500-6C8809(config-passpoint-policy-test)#

Related Commands


no	Removes the configured connection capability element on the passpoint policy