Configures LDAP dead period interval

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000


ldap-deadperiod <60-300>


ldap-deadperiod <60-300>

ldap-deadperiod <60-300>

Configures an LDAP dead period. When enabled, LDAP service allows the AP or controller to bind with the LDAP server and retrieve user details to match with user-defined role filters. The LDAP deadperiod is the interval between two consecutive attempts to bind with the LDAP server. To enable LDAP service, use the ldap-query command.

  • <60-300> – Specify the interval from 60 - 600 seconds. The default is 120 seconds.


nx9500-6C8809(config-role-policy-test)#ldap-deadperiod 100
nx9500-6C8809(config-role-policy-test)#show context
role-policy test
 default-role use ip-access-list in test precedence 1
 ldap-deadperiod 100

Related Commands

no (role-policy-config-mode-command)

Removes or resets the LDAP deadperiod interval