nsight-policy (global-config-mode)
Creates an NSight policy and enters its
configuration mode. Starting with WiNG 5.9.4, Extreme NSight is a separate target, with the
Extreme NSight server enabled on an external VM appliance. On the WiNG controller, the NSight
policy configures this external NSight server's IP address or hostname.
Configure the
NSight policy and apply to the RF Domain context. When applied, the RF Domain manager posts
statistics (polled from devices within the RF Domain) to the external Extreme NSight server
specified in the policy.
Supported in the following platforms:
- Service Platforms — NX7500, NX9500,
NX9600, VX9000
Syntax
nsight-policy <NSIGHT-POLICY-NAME>
Parameters
nsight-policy <NSIGHT-POLICY-NAME>
<NSIGHT-POLICY-NAME> |
Specify the NSight policy name. If a policy with the specified name does not
exist, it is created. |
|
Examples
nx9500-6C8809(config)#nsight-policy test
nx9500-6C8809(config-nsight-policy-test)#?
Nsight Policy Mode commands:
enable Enable this Nsight policy
mandatory Configure mandatory app stats reporting
no Negate a command or set its defaults
server Configure Nsight server
clrscr Clears the display screen
commit Commit all changes made in this session
end End current mode and change to EXEC mode
exit End current mode and down to previous mode
help Description of the interactive help system
revert Revert changes
service Service Commands
show Show running system information
write Write running configuration to memory or terminal
nx9500-6C8809(config-nsight-policy-test)#
Related Commands
no |
Removes an existing NSight policy |
|