no (meshpoint-device-config)

Negates the commands for a meshpoint device or resets values to default

Configured on WiNG 7.1.X controller and pushed to the following WiNG 5.9.X APs:

• Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8543, AP8533

Syntax

no [acs|exclude|hysteresis|monitor|path-method|preferred|root|root-select]

no acs [channel-hold-time|channel-switch-delta|channel-width|ocs-duration|
ocs-frequency|path-min|path-threshold|preferred-interface-tolerance-period|
preferred-radio-interface|priority-meshpoint|sample-count|snr-delta|
signal-threshold|tolerance-period] [2.4GHZ|5GHz]

no exclude wired-peer mint-level-1

no hysteresis [min-threshold|period|root-sel-snr-delta|snr-delta]

no monitor [critical-resource|primary-port-link-loss]

no [path-method|root {select-method}]

no root-select cost-root

no preferred [interface|root|neighbor]

Parameters

no <PARAMETERS>

Examples

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#show context
 meshpoint-device test
  name test
  root
  preferred root 22-33-44-55-66-77
  preferred neighbor 11-22-33-44-55-66
  preferred interface 5GHz
  monitor critical-resource action no-root
nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#

nx9500-6C8809(config-profile-testAP8432-meshpoint-test))#no monitor critical-resource

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#no preferred neighbor

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#no root

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#no preferred interface

nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#show context
 meshpoint-device test
  name test
  no root
  preferred root 22-33-44-55-66-77
nx9500-6C8809(config-profile-testAP8432-meshpoint-test)#