Profile Config Commands

Turns on and off access point LEDs

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000


led {flash-pattern}


led {flash-pattern}
led flash-pattern Optional. Enables LED flashing on the device using this profile

Select this option to flash an access point‘s LEDs in a distinct manner (different from its operational LED behavior). Enabling this feature allows an administrator to validate an access point has received its configuration (perhaps remotely at the site of deployment) without having to log into the managing controller or service platform. This feature is disabled by default.


nx9500-6C8809(config-profile-RFS6000Test)#led flash-pattern

nx9500-6C8809(config-profile-RFS6000Test)#show context
profile rfs4000 RFS4000Test
 no autoinstall configuration
 no autoinstall firmware
 led flash-pattern
 crypto ikev1 policy ikev1-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ikev2 policy ikev2-default
  isakmp-proposal default encryption aes-256 group 2 hash sha
 crypto ipsec transform-set default esp-aes-256 esp-sha-hmac
 crypto ikev1 remote-vpn
 crypto ikev2 remote-vpn
 crypto auto-ipsec-secure

Related Commands

no Disables or reverts settings to their default