boot

Displays a device‘s boot configuration. Use this command to view the primary and secondary image details, such as Build Date, Install Date, and Version. This command also displays the current boot and next boot information.

Supported in the following platforms:

• Access Points — AP505i, AP510i/e, AP560i/h
• Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

show boot {on <DEVICE-NAME>}

Parameters

show boot {on <DEVICE-NAME>}

Examples

ap510-133B38#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       06/28/2019 02:43:33     07/02/2019 13:28:20     7.2.0.0-009D
  Secondary     06/21/2019 02:34:38     06/25/2019 14:46:00     7.2.0.0-006D
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Primary
Software Fallback  : Enabled
ap510-133B38#

nx9500-6C8809>show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       06/28/2019 09:31:40     07/01/2019 13:57:47     7.2.0.0-009D
  Secondary     06/26/2019 09:37:54     06/28/2019 12:38:00     7.2.0.0-008D
--------------------------------------------------------------------------------
Current Boot       : Primary
Next Boot          : Primary
Software Fallback  : Enabled
VM support         : Not present
nx9500-6C8809>