preferred (meshpoint-device-config)

Configures the preferred path parameters for this meshpoint device

Configured on WiNG 7.1.X controller and pushed to the following WiNG 5.9.X APs:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8543, AP8533

Syntax

preferred [neighbor <MAC>|root <MAC>|interface [2.4GHz|4.9GHz|5GHz]]

Parameters

preferred [neighbor <MAC>|root <MAC>|interface [2.4GHz|4.9GHz|5GHz]]

preferred

Configures the preferred path parameters

neighbor <MAC>

Adds the MAC address of a neighbor meshpoint as a preferred neighbor

root <MAC>

Adds the MAC address of a root meshpoint as a preferred root

interface [2.4GHz|4.9GHz|5GHz]

Sets the preferred interface

Examples

nx9500-6C8809(config-profile-AP71XXTestProfile-meshpoint-test)#preferred neighbor 11-22-33-44-55-66
nx9500-6C8809(config-profile-AP71XXTestProfile-meshpoint-test)#preferred root 22-33-44-55-66-77
nx9500-6C8809(config-profile-AP71XXTestProfile-meshpoint-test)#preferred interface 5GHz
nx9500-6C8809(config-profile-AP71XXTestProfile-meshpoint-test)#show context
 meshpoint-device test
  name test
  preferred root 22-33-44-55-66-77
  preferred neighbor 11-22-33-44-55-66
  preferred interface 5GHz
  monitor critical-resource action no-root
nx9500-6C8809(config-profile-AP71XXTestProfile-meshpoint-test)#

Related Commands

no (meshpoint-device-config)

Removes the configuration of preferred paths for this meshpoint device