max-clients

interface-config-radio-instance

Configures the maximum number of wireless clients allowed to associate with this radio

Supported in the following platforms:

  • Access Points — AP505i, AP510i, AP510e, AP560i, AP560h

Syntax

max-clients <0-512>

Parameters

max-clients <0-512>
max-clients <0-512> Configures the maximum number of clients allowed to associate with a radio, subject to the access point‘s limit. Specify a value from 0 - 512. The default is 512.
Note: For the WiNG 7.2.0 AP5XX model access points, the maximum number of clients supported per radio is 512.
Note: For the WiNG 5.9.X legacy access points this range is 0 - 256 and the maximum number of clients supported per radio is 256.

Example

nx9500-6C8809(config-profile-510TestProfile-if-radio1)#max-clients 100

nx9500-6C8809(config-profile-510TestProfile-if-radio1)#show context
 interface radio1
  description "Primary radio to use"
  channel 1
  data-rates b-only
  beacon period 50
  beacon dtim-period bss 1 5
  beacon dtim-period bss 2 2
  ..............................................
  beacon dtim-period bss 12 5
  beacon dtim-period bss 13 5
  beacon dtim-period bss 14 5
  beacon dtim-period bss 15 5
  beacon dtim-period bss 16 5
  antenna-gain 12.0
  guard-interval long
  aggregation ampdu tx-only
  aeroscout forward
  ekahau forward ip 172.16.10.1 port 3
  antenna-mode 2x2
  antenna-diversity
  max-clients 100
  airtime-fairness prefer-ht weight 6
  lock-rf-mode
  extended-range 15
  antenna-downtilt
nx9500-6C8809(config-profile-510TestProfile-if-radio1)#

Related Commands

no (radio-interface-config-command) Resets the maximum number of wireless clients allowed to associate with a radio