Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

router-id

Configures the tunnel's local router ID

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

router-id [<1-4294967295>|<IP>]

Parameters

router-id [<1-4294967295>|<IP>]

router-id [<1-4294967295>|<IP>]

Configures the tunnel's local router ID in one of the following formats:

  • <1-4294967295> – Router ID in the number format (from1- 4294967295)

  • <IP> – Router ID in IP address format (A.B.C.D)

Examples

nx9500-6C8809(config-profile default-rfs4000-l2tpv3-tunnel-Tunnel1)#router-id 2000
nx9500-6C8809(config-profile default-rfs4000-l2tpv3-tunnel-Tunnel1)#show context
 l2tpv3 tunnel Tunnel1
  peer 2 hostname tunnel1peer1 udp port 100
  router-id 2000
  establishment-criteria cluster-master
nx9500-6C8809(config-profile default-rfs4000-l2tpv3-tunnel-Tunnel1))#

Related Commands

no

Removes the tunnel's router ID
Published July 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page