Configures 802.1x standard authentication controls
Dot1x (or 802.1x) is an IEEE standard for network authentication. It enables media-level (layer 2) access control, providing the capability to permit or deny connectivity based on user or device identity. Dot1x allows port-based access using authentication. An dot1x enabled port can be dynamically enabled or disabled depending on user identity or device connection.
Devices supporting dot1x allow the automatic provision and connection to the wireless network without launching a Web browser at login. When within range of a dot1x network, a device automatically connects and authenticates without needing to manually login.
Before authentication, the endpoint is unknown, and traffic is blocked. Upon authentication, the endpoint is known and traffic is allowed. The controller or service platform uses source MAC filtering to ensure only the authenticated endpoint is allowed to send traffic.
Dot1x authentication capabilities is supported on the following platforms:
Dot1x supplicant capabilities is supported on the following platforms:
dot1x [guest-vlan|holdtime|system-auth-control|use]
dot1x holdtime <0-600>
dot1x system-auth-control
dot1x use aaa-policy <AAA-POLICY-NAME>
dot1x system-auth-control
| system-auth-control | Enables system auth control. Enables dot1x authorization globally for the controller. This feature is disabled by default. |
dot1X holdtime <0-600>
| holdtime <0-600> | Configures a
holdtime value. This is the interval after which an authentication attempt
is ignored or failed.
Adding a hold time at startup allows time for the network to converge before receiving or transmitting 802.1x authentication packets. |
dot1x guest-vlan supplicant
| guest-vlan | Configures guest VLAN and supplicant behavior. This feature is disabled by default. |
| supplicant | Allows 802.1x capable supplicant to enter guest VLAN. When enabled, this is the VLAN that supplicant‘s traffic is bridged on. |
dot1x use aaa-policy <AAA-POLICY-NAME>
| use aaa-policy <AAA-POLICY-NAME> | Associates a
specified 802.1x AAA policy (for MAC authentication) with this access point
profile
|
nx9500-6C8809(config-profile-test-nx5500)#dot1x use aaa-policy OnBoarding nx9500-6C8809(config-profile-test-nx5500)#dot1x system-auth-control nx9500-6C8809(config-profile-test-nx5500)#show context profile nx5500 test-nx5500 no autoinstall configuration no autoinstall firmware crypto ikev1 policy ikev1-default isakmp-proposal default encryption aes-256 group 2 hash sha crypto ikev2 policy ikev2-default isakmp-proposal default encryption aes-256 group 2 hash sha crypto ipsec transform-set default esp-aes-256 esp-sha-hmac crypto ikev1 remote-vpn crypto ikev2 remote-vpn crypto auto-ipsec-secure crypto load-management crypto remote-vpn-client interface ge1 interface ge2 interface ge3 interface ge4 interface ge5 interface ge6 interface pppoe1 use firewall-policy default service pm sys-restart router ospf router bgp dot1x system-auth-control dot1x use aaa-policy OnBoarding nx9500-6C8809(config-profile-test-nx5500)#
| no | Disables or reverts settings to their default |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB