refresh-time (dhcpv6-pool-config)

Configures this DHCPv6 pool‘s refresh time in seconds. This is the interval between two successive DHCP pool refreshes. The DHCP refresh process refreshes IPv6 client information.

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

refresh-time <600-4294967295>

Parameters

refresh-time <600-4294967295>
refresh-time <600-4294967295> Specify this DHCPv6 pool‘s refresh time from 600 -4294967295 seconds.

Examples

nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#refresh-time 1000
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#show context
 dhcpv6-pool DHCPv6Pool1
  network 2002::/64
  refresh-time 1000
  domain-name TechPubs
  dns-server 2002::1
  option DHCPv6Pool1Option 60
nx9500-6C8809(config-dhcpv6-server-policy-test-pool-DHCPv6Pool1)#

Related Commands

no (dhcpv6-pool-config) Removes or reverts the configured DHCPv6 pool‘s refresh time