crypto-cmp-cert-update

Triggers a CMP (Certificate Management Protocol) certificate update on a specified device or devices
Note

Note

This command and its syntax is common to both the User Executable and Privilege Executable configuration modes.

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

crypto-cmp-cert-update <TRUSTPOINT-NAME> {on <DEVICE-NAME>}

Parameters

crypto-cmp-cert-update <TRUSTPOINT-NAME> {on <DEVICE-NAME>}
crypto-cmp-cert-update <TRUSTPOINT-NAME> on <DEVICE-NAME> Triggers a CMP certificate update on a specified device or devices
  • <TRUSTPOINT-NAME> – Specify the target trustpoint name. A trustpoint represents a CA/identity pair containing the identity of the CA, CA specific configuration parameters, and an association with an enrolled identity certificate. Use the crypto-cmp-policy context mode to configure the trustpoint.
    • on <DEVICE-NAME> – Optional. Initiates a CMP certificate update and response on a specified device or devices. Specify the name of the AP, wireless controller, or service platform. Multiple devices can be provided as a comma separated list.
      • <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.

Examples

NOC-NX9500#crypto-cmp-cert-update test on B4-C7-99-71-17-28
CMP Cert update success
NOC-NX9500#