roam-consortium

Configures a list of RC (Roaming Consortium) OIs (Organization Identifiers) supported on this hotspot. The beacons and probe responses communicate this Roaming Consortium list to devices. This information enables a device to identify the networks available through this AP.

Each OI identifies a either a group of SSPs (Subscription Service Providers) or a single SSP.

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

roam-consortium hex <WORD>

Parameters

roam-consortium hex <WORD>

roam-consortium hex <WORD>

Adds a Roaming Consortium OI to this hotspot in hexadecimal format

  • <WORD> – Specify the Roaming Consortium OI in hexadecimal format (should not exceed 128 characters)

hex <WORD>

Configures a hexadecimal input

  • <WORD> – Specify the Roaming Consortium OI in hexadecimal format (should not exceed 128 characters)

Examples

nx9500-6C8809(config-passpoint-policy-test)#roam-consortium hex 223344
nx9500-6C8809(config-passpoint-policy-test)#show context
passpoint-policy test
 access-network-type chargeable-public
 connection-capability ip-protocol 2 port 10 closed
 nai-realm example
  eap-method 1 ttls auth-param vendor hex 00001E
  eap-method 2 rsa-public-key auth-param credential cert
 net-auth-type accept-terms url www.test.com
 operator name exampleoperator
 roam-consortium hex 223344
 3gpp mcc 505 mnc 14
 osu ssid test
 osu provider test
  name testOSU
  method soap-xml-spp priority 2
  nai test.org
  server-url test.exampe.com
nx9500-6C8809(config-passpoint-policy-test)#

Related Commands

no

Removes the Roaming Consortium OIs supported on this passpoint policy