frame-type

Configures the frame type used for matching with this WIPS policy signature

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

frame-type [all|assoc|auth|beacon|data|deauth|disassoc|mgmt|probe-req|probe-resp|reassoc]

Parameters

frame-type [all|assoc|auth|beacon|data|deauth|disassoc|mgmt|probe-req|probe-resp|
reassoc]

frame-type

Configures the frame type used for matching

all

Matches all frame types

assoc

Matches only association frames

auth

Matches only authentication frames

beacon

Matches only beacon frames

data

Matches only data frames

deauth

Matches only de-authentication frames

disassoc

Matches only disassociation frames

mgmt

Matches only management frames

probe-req

Matches only probe request frames

probe-resp

Matches only probe response frames

reassoc

Matches only re-association frames

Usage Guidelines

The frame type configured determines the SSID match type. To set the SSID match type as SSID, the frame type must be set to beacon, probe-req or probe-resp. For more information see, ssid-match.

Examples

nx9500-6C8809(config-test-signature-test)#frame-type reassoc
nx9500-6C8809(config-test-signature-test)#show context
 signature test
  bssid 11-22-33-44-55-66
  dst-mac 55-66-77-88-99-00
  frame-type reassoc
  filter-ageout 8
nx9500-6C8809(config-test-signature-test)#

Related Commands

no (wips-policy-config-mode-command)

Resets a WIPS signature frame type