channel (iot-device-type-imagotag-policy)

Manually configures the channel assigned for the ESL communicator to tag communication in the 2.4 GHz band. Or, enables ACS (Auto-Channel Selection) mode.

Supported in the following platforms:

  • Access Points — AP-8432
  • Wireless Controllers — RFS 4000
  • Service Platforms — NX 5500, NX 75XX, NX 95XX, NX 96XX, VX 9000

Syntax

channel [<0-10>|acs]

Parameters

channel [<0-10>|acs]
channel [<0-10>|acs] Configures the 2.4 GHz frequency channel, using one of the following options:
  • <0-10> – Manually configures the channel from 0 - 10.
  • acs – Enables ACS channel selection mode. This is the default setting.

Examples

nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#show context
 iot-device-type-imagotag-policy ImagoTagPolicy
  channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#

Related Commands

no (iot-device-type-imagotag-policy) Reverts the channel selection mode to ACS