no

crypto-remote-vpn-client commands

Removes the remote VPN client settings

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

no [dhcp-peer|peer <1-3>|shutdown|transform-set]
no dhcp-peer [authentication|localid]
no peer <1-3>
no shutdown
no transform-set

Parameters

no <PARAMETERS>
no <PARAMETERS> Removes or resets this remote VPN client settings based on the parameters passed

Example

rfs4000-229D58(config-profile-testRFS4000-crypto-ikev2-remote-vpn-client)#show context
 crypto remote-vpn-client
  peer 1 ikev2 peer5
rfs4000-229D58(config-profile-testRFS4000-crypto-ikev2-remote-vpn-client)#

rfs4000-229D58(config-profile-testRFS4000-crypto-ikev2-remote-vpn-client)#no peer 1

rfs4000-229D58(config-profile-testRFS4000-crypto-ikev2-remote-vpn-client)#show context
 crypto remote-vpn-client
rfs4000-229D58(config-profile-testRFS4000-crypto-ikev2-remote-vpn-client)#