Preface
- Text Conventions
- Platform-Dependent Conventions
- Providing Feedback to Us
- Getting Help
- Documentation and Training
About this Guide
- Notational Conventions
Introduction
- WiNG 7.1.X Operating System Overview
- CLI Overview
User Exec Mode Commands
- user-exec-commands
  - captive-portal-page-upload
  - change-password
  - clear
  - clock
  - cluster
  - commit
  - connect
  - crypto
  - create-cluster
  - crypto-cmp-cert-update
  - database
  - database-backup
  - database-restore
  - device-upgrade
  - enable
  - file-sync
  - help
  - join-cluster
  - l2tpv3
  - logging
  - mint
  - no
  - on
  - opendns
  - page
  - ping
  - ping6
  - ssh
  - telnet
  - terminal
  - time-it
  - traceroute
  - traceroute6
  - virtual-machine
  - watch
  - exit
Privileged Exec Mode Commands
- privileged-exec-commands
  - archive
  - boot
  - cd
  - configure
  - copy
  - cpe
  - delete
  - diff
  - dir
  - disable
  - edit
  - erase
  - ex3500
  - factory-reset
  - halt
  - mkdir
  - more
  - operational-mode
  - pwd
  - re-elect
  - reload
  - rename
  - rmdir
  - self
  - t5
  - upgrade
  - upgrade-abort
  - raid
  - no
Global Configuration Commands
- global-config-commands
Common Commands
- common-commands
  - clrscr
  - commit
  - exit
  - help
  - no
  - revert
  - service
  - show
  - write
Show Commands
- show-commands
  - show
  - adoption
  - bluetooth
  - boot
  - bonjour
  - captive-portal
  - captive-portal-page-upload (show commands)
  - cdp
  - classify-url
  - clock
  - cluster
  - cmp-factory-certs
  - commands
  - context
  - critical-resources
  - crypto
  - database
  - device-upgrade
  - dot1x
  - dpi
  - environmental-sensor
  - event-history
  - event-system-policy
  - ex3500
  - extdev
  - fabric-attach
  - file
  - file-sync
  - firewall
  - global
  - gps (show command)
  - gre
  - guest-registration
  - interface
  - iot-device-type-imagotag
  - ip
  - ip-access-list-stats
  - ipv6
  - ipv6-access-list
  - l2tpv3
  - lacp
  - ldap-agent
  - licenses
  - lldp
  - logging
  - mac-access-list-stats
  - mac-address-table
  - macauth
  - mac-auth-clients
  - mint
  - ntp
  - password-encryption
  - pppoe-client
  - privilege
  - radius
  - reload
  - rf-domain-manager
  - role
  - route-maps
  - rtls
  - running-config
  - session-changes
  - session-config
  - sessions
  - site-config-diff
  - smart-rf
  - snmpv3 (show command)
  - spanning-tree
  - startup-config
  - t5
  - terminal
  - timezone
  - traffic-shape
  - tron (show command)
  - upgrade-status
  - version
  - vrrp
  - virtual-machine
  - wireless
  - web-filter
  - what
  - wwan
Profiles
- Profile Config Commands
- Device Config Commands
  - adoption-site
  - area
  - channel-list
  - contact
  - country-code
  - floor
  - geo-coordinates
  - hostname
  - lacp
  - layout-coordinates
  - license
  - location
  - location-server
  - location-tenantid
  - mac-name
  - no
  - nsight
  - override-wlan
  - remove-override
  - rsa-key
  - sensor-server
  - timezone
  - trustpoint (device-config-mode)
  - raid
AAA Policy
- aaa-policy-commands
Auto-Provisioning Policy
- auto-provisioning-policy-commands
  - adopt
  - auto-create-rfd-template
  - default-adoption
  - deny
  - evaluate-always
  - redirect
  - upgrade
  - no
    - upgrade
Association-ACL Policy
- Association-acl-policy-commands
  - deny
  - permit
  - no
Access-List Policy
- ip-access-list
- mac-access-list
- ipv6-access-list
- ip-snmp-access-list
- ex3500-ext-access-list
- ex3500-std-access-list
DHCP-Server Policy
- dhcp-server-policy commands
- dhcpv6-server-policy commands
Firewall Policy
- firewall-policy-commands
  - acl-logging
  - alg
  - clamp
  - dhcp-offer-convert
  - dns-snoop
  - firewall
  - flow
  - ip
  - ip-mac
  - ipv6
  - ipv6-mac
  - logging
  - proxy-arp
  - proxy-nd
  - stateful-packet-inspection-12
  - storm-control
  - virtual-defragmentation
  - no
MiNT Policy
- mint-policy-commands
  - level
  - lsp
  - mtu
  - router
  - udp
  - no
Management Policy
- management-policy-commands
RADIUS Policy
- radius-group
  - guest
  - policy
  - rate-limit
  - no
- radius-server-policy
  - authentication
  - bypass
  - chase-referral
  - crl-check
  - ldap-agent
  - ldap-group-verification
  - ldap-server
  - local
  - nas
  - proxy
  - session-resumption
  - termination
  - use
  - no
- radius-user-pool-policy
  - duration
  - user
  - no
Radio-QoS Policy
- radio-qos-policy-commands
Role Policy
- role-policy-commands
SMART-RF Policy
- smart-rf-policy commands
WIPS Policy
- wips-policy-commands
WLAN-QoS Policy
- WLAN-QOS-Policy commands
L2TPv3 Policy
- l2tpv3-policy-commands
- l2tpv3-tunnel-commands
- l2tpv3-manual-session-commands
Router Mode
- router-mode-commands
Routing Policy
- routing-policy-commands
AAA-TACACS Policy
- aaa-tacacs-policy-commands
Meshpoint Policy
- meshpoint-config-instance
- meshpoint-qos-policy-config-instance
- meshpoint-device-config-instance
Passpoint Policy
- passpoint-policy
Crypto-CMP Policy
- crypto-cmp-policy-instance
- other-cmp-related-commands
  - use (other-cmp-related-commands)
  - show (other-cmp-related-commands)
Roaming Assist Policy
- roaming-assist-policy commands
Border Gateway Protocol
- bgp ip-prefix-list
- bgp ip-access-list
- bgp as-path-list
- bgp community-list
- bop ext-community-list
- bgp route-map
- bgp router-config
- bgp neighbor-config
Controller Managed WLAN Use Case
- CREATING A FIRST CONTROLLER MANAGED WLAN
AP Dual Modes of Operation
- Understanding Dual Mode Capability
AP5XX REV AA Upgrade Procedure
- Introduction
- Bulk 'Rev: AA' AP505/AP510 Upgrade through Virtual Controller
- Bulk 'Rev:AA' AP5XX Upgrade through WiNG Controller/ExtremeCloud Appliance

crypto

Associates an existing and configured VPN crypto map with this VLAN interface.

Crypto map entries are sets of configuration parameters for encrypting packets that pass through the VPN tunnel. For more information on crypto maps, see crypto-map-config-commands.

Supported in the following platforms:

Access Points — AP505i, AP510i/e, AP560i/h
Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

crypto map <CRYPTO-MAP-NAME>

Parameters

crypto map <CRYPTO-MAP-NAME>

map <CRYPTO-MAP-NAME>

Attaches a crypto map to the selected VLAN interface. The crypto map should be existing and configured.

<CRYPTO-MAP-NAME> – Specify the crypto map name.

Example

nx9500-6C8809(config-profile-default-rfs4000-if-vlan8)#crypto map map1

nx9500-6C8809(config-profile-default-rfs4000-if-vlan8)#show context
 interface vlan8
  crypto map map1
nx9500-6C8809(config-profile-default-rfs4000-if-vlan8)#

Related Commands

no	Disables or reverts interface VLAN settings to their default

Published July 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback