monitoring-interval

Configures the interval, in seconds, at which clients are monitored to determine if their RSSI value is below the specified handoff-threshold value

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

monitoring-interval <1-60>

Parameters

monitoring-interval <1-60>

monitoring-interval <1-60>

Specifies the interval, in seconds, at which clients are monitored to determine if their RSSI is below the specified handoff-threshold
  • <1-60> – Specify the duration from 1 - 60 seconds. The default is 5 seconds.

Examples

nx9500-6C8809(config-roaming-assist-policy-test)#monitoring-interval 40
nx9500-6C8809(config-roaming-assist-policy-test)#show context
roaming-assist-policy test
 aggressiveness medium-high
 monitoring-interval 40
 handoff-count 5
 detection-threshold -90
 handoff-threshold -75
 action log
 disassoc-time 7
nx9500-6C8809(config-roaming-assist-policy-test)#

Related Commands

no Removes the configured monitoring interval details