username

interface-config-wwan-instance

Configures the names of users accessing this interface

Supported in the following platforms:

  • Access Point — AP7161, AP8163
  • Wireless Controllers — RFS4000

Syntax

username <WORD>

Parameters

username <WORD>
username <WORD> Configures the username for authentication support by the cellular data carrier
  • <WORD> – Specify the username (should not exceed 32 characters).

Example

nx9500-6C8809(config-profile-testRFS4000-if-wwan1)#username TechPubsUser1

nx9500-6C8809(config-profile-testRFS4000-if-wwan1)#show context
 interface wwan1
  username TechPubsUser1
  password TechPubsTesting@123
  crypto map test
  ip nat inside
  use ip-access-list in test
  ip default-gateway priority 1
nx9500-6C8809(config-profile-testRFS4000-if-wwan1)#

Related Commands

no Removes the configured username