broadcast-dhcp

Configures broadcast DHCP packet handling parameters

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

broadcast-dhcp validate-offer

Parameters

broadcast-dhcp validate-offer
validate-offer Enables validation of the broadcast DHCP packet destination (a wireless client associated to the radio) before forwarding over the air. This option is disabled by default.

Examples

nx9500-6C8809(config-wlan-test)#broadcast-dhcp validate-offer
nx9500-6C8809(config-wlan-test)#show context
wlan test
 ssid test
 bridging-mode local
 encryption-type none
 authentication-type eap
 accounting syslog host 172.16.10.4 port 2
 acl exceed-rate wireless-client-denied-traffic 20 disassociate
broadcast-dhcp validate-offer
nx9500-6C8809(config-wlan-test)#

Related Commands

no (wlan-config-mode) Disables validation of the broadcast DHCP packet destination (a wireless client associated to the radio) before forwarding over the air