Specifies the action invoked on the client once it reaches a specified threshold value. The threshold values are configured based on the client load.

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000


action [assisted-roam|deauth|log]


action [assisted-roam|deauth|log]
action [assisted-roam|deauth|log] Configures the action invoked on the client once it reaches the specified threshold value. The options are:
  • assisted-roam – Provides 802.11v assisted roaming facility to the client
  • deauth – De-authenticates the client. This is the default setting.
  • log – Generates a log
Note: In all three cases an event is generated. However, the message generated differs and is based on the action specified.


nx9500-6C8809(config-roaming-assist-policy-test)#action log
nx9500-6C8809(config-roaming-assist-policy-test)#show context
roaming-assist-policy test
 action log

Related Commands

no Removes the configured action details