webpage-auto-upload

Enables automatic upload of advanced Web pages to requesting clients on association. Enable this option if the webpage-location is selected as advanced. For more information, see webpage-location.

If this feature is enabled, Access Points shall request for Web pages from the controller during adoption. If the controller has a different set of Web pages, than the ones existing on the Access Points, the controller shall distribute the Web pages uploaded on it to the Access Points.

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

webpage-auto-upload

Parameters

None

Examples

nx9500-6C8809(config-captive-portal-test)#webpage-auto-upload
nx9500-6C8809(config-captive-portal-test)#show context
captive-portal test
 webpage-auto-upload
 logout-fqdn logout.testuser.com
nx9500-6C8809(config-captive-portal-test)#

Related Commands

no

Disables automatic upload of advanced Web pages on a captive portal

webpage

Configures Web pages displayed when interacting with a captive portal

webpage-location

Specifies the location of the Web pages used for authentication