use

Configures a tunnel to use a specified L2TPV3 tunnel policy and specified critical resources

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

use [critical-resource|l2tpv3-policy]
use critical-resource <CRM-NAME1> {<CRM-NAME2>} {<CRM-NAME3>} {<CRM-NAME4>}
use l2tpv3-policy <L2TPV3-POLICY-NAME>

Parameters

use critical-resource <CRM-NAME1> {<CRM-NAME2>} {<CRM-NAME3>} {<CRM-NAME4>}

use critical-resource <CRM-NAME1> {<CRM-NAME2>} {<CRM-NAME3>} {<CRM-NAME4>}

Specifies the critical resource(s) to use with this tunnel

  • <CRM1-NAME> – Specify the first critical resource name (should be existing).

  • <CRM-NAME2/3/4> – Optional. Specify the second/third/fourth critical resource names. Maximum of four critical resources can be monitored.

Note: In case of tunnel initiator, L2TPv3 tunnel is established only if the critical resources identified by the <CRM-NAME1>.................. <CRM-NAME4> arguments are available at the time of tunnel establishment.
Note: In case of L2TPv3 tunnel termination, all incoming tunnel establishment requests are rejected if the critical resources specified by the <CRM-NAME1>.............. <CRM-NAME4> arguments are not available.
use l2tpv3-policy <L2TPV3-POLICY-NAME>

use l2tpv3-policy <L2TPV3-POLICY-NAME>

Associates a specified L2TPV3 policy with this tunnel

  • <L2TPV3-POLICY-NAME> – Specify the policy name.

Examples

nx9500-6C8809(config-profile default-rfs4000-l2tpv3-tunnel-Tunnel1)#use l2tpv3-policy L2TPV3Policy1
nx9500-6C8809(config-profile default-rfs4000-l2tpv3-tunnel-Tunnel1)#show context
 l2tpv3 tunnel Tunnel1
  peer 2 hostname tunnel1peer1 udp port 100
  use l2tpv3-policy L2TPV3Policy1
  session tunnel1peer1session1 pseudowire-id 5000 traffic-source vlan 10-20 native-vlan 1
  router-id 2000
  establishment-criteria cluster-master
nx9500-6C8809(config-profile default-rfs4000-l2tpv3-tunnel-Tunnel1)#

Related Commands

no

Removes the L2TPV3 policy configured with a tunnel and reverts to the default tunnel policy