Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

address (dhcpv4-pool-config)

Adds IP addresses to the DHCP address pool. These IP addresses are assigned to each device joining the network.

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

address [<IP>|<HOST-ALIAS-NAME>|range]
address [<IP>|<HOST-ALIAS-NAME>|range [<START-IP>|<START-HOST-ALIAS-NAME>] [<END-IP>|<END-HOST-ALIAS-NAME>]]
{class <DHCP-CLASS-NAME>}

Parameters

address [<IP>|<HOST-ALIAS-NAME>|range [<START-IP>|<START-HOST-ALIAS-NAME>] [<END-IP>|<END-HOST-ALIAS-NAME>]]
{class <DHCP-CLASS-NAME>}

<IP>

Adds a single IP address to the DHCP address pool

<HOST-ALIAS-NAME>

Adds a single host mapped to the specified host alias. The host alias should be existing and configured.

Note: A network host alias maps a name to a single network host. For example, ‘alias host $HOST 1.1.1.100‘. In this example the host alias is ‘$HOST‘ and it maps to a single host ‘1.1.1.100‘. For more information, see alias .
range [<START-IP>| <START-HOST-ALIAS-NAME>] [<END-IP>|<END-HOST-ALIAS-NAME>]

Adds a range of IP addresses to the DHCP address pool. Use one of the following options to provide the first IP address in the range:

  • <START-IP> – Specifies the first IP address in the range

  • <START-HOST-ALIAS-NAME> – Specifies a host alias, mapped to the first IP address in the range

Use one of the following options to provide the last IP address in the range:

  • <END-IP> – Specifies the last IP address in the range

  • <END-HOST-ALIAS-NAME> – Specifies a host alias, mapped to the last IP address in the range

Note: The host aliases should be existing and configured.

class <DHCP-CLASS-NAME>

Optional. Applies additional DHCP options, or a modified set of options to those available to wireless clients. For more information, see dhcp-class (dhcpv4-server-policy-config).

  • <DHCP-CLASS-NAME> – Sets the DHCP class (should be existing and configured>

Examples

rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#address 192.168.13.4 class dhcpclass1
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#show context
 dhcp-pool testPool
  address 192.168.13.4 class dhcpclass1
rfs4000-229D58(config-dhcp-policy-test-pool-testPool)#

Related Commands

no (dhcpv4-pool-static-binding)

Removes the DHCP pool's configured IP addresses
dhcp-class (dhcpv4-server-policy-config)

Creates and configures the DHCP class parameters
alias

Creates and configures network, VLAN, host, string, and network-service aliases
Published July 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page