window-size (iot-device-type-imagotag-policy)

Configures the transmission window size for messages exchanged between ESL communicator and tags

Supported in the following platforms:

  • Access Points — AP-8432
  • Wireless Controllers — RFS 4000
  • Service Platforms — NX 5500, NX 75XX, NX 95XX, NX 96XX, VX 9000

Syntax

window-size <1-14>

Parameters

window-size <1-14>
window-size <1-14> Configures the window size
  • <1-14> – Specify a value from 1 - 14 bytes. The default value is 14 bytes.
Note: SES-Imagotags recommends NOT to change the default setting.

Examples

nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#window-size 12
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#show context
 iot-device-type-imagotag-policy ImagoTagPolicy
  enable
  output-power Level-B
  window-size 12
  payload-size 25
  port 200
  ssl-enable
  fcc-enable
  channel 9
nx9500-6C8809(config-iot-device-type-imagotag-policy-ImagoTagPolicy)#

Related Commands

no (iot-device-type-imagotag-policy) Reverts the window-size to 14 bytes.