Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

local-endpoint-ip

crypto-map-ipsec-manual-instance

Uses the configured IP as local tunnel endpoint address, instead of the interface IP (Advanced Configuration)

Supported in the following platforms:

  • Access Points — AP505i, AP510i/e, AP560i/h
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

local-endpoint-ip <IP>

Parameters

local-endpoint-ip <IP>
local-endpoint-ip <IP> Uses the configured IP as local tunnel‘s endpoint address
  • <IP> – Specify the IP address. The specified IP address must be available on the interface.

Example

nx9500-6C8809(config-profile-default-rfs4000-cryptomap-map1#1)#local-endpoint-ip 172.16.10.3
Published July 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page