crypto-map-ipsec-isakmp-instance
Configures the mode config method (pull or push) associated with the remote VPN client
modeconfig [pull|push]
modeconfig [pull|push]
modeconfig [pull|push] | Configures the
mode config method associated with a remote VPN client. The options are:
pull and push. The mode (pull or push) defines the method used to assign a virtual IP. This setting is relevant for IKEv1 only, since IKEv2 always uses the configuration payload in pull mode. The default setting is push. |
Remote VPN client: rfs4000-229D58(config-device-00-23-68-22-9D-58-cryptomap-test#2)#modeconfig pull rfs4000-229D58(config-device-00-23-68-22-9D-58-cryptomap-test#2)#show context crypto map test 2 ipsec-isakmp dynamic modeconfig pull rfs4000-229D58(config-device-00-23-68-22-9D-58-cryptomap-test#2)