Adjusting Settings to Allow for Logging at the Debug Level

Adjusting Settings for an Application shows how you would adjust the previous Syslog configuration so that all AAA-related authentication messages (level 8) could be forwarded to Server 2 at IP address 10.1.1.3, displayed on the console and saved to persistent file storage. This would enable all Syslog messaging capabilities for this particular application. Since the severity for this new server has not changed from the default of level 8, there is no need to adjust this setting.

Adjusting Settings for an Application

Step	Task	Command(s)
1	Configure Syslog server 2 and accept default settings (listed in Syslog Server Default Settings).	set logging server 2 ip-addr 10.1.1.3 state enable
2	Set the severity level for the AAA application to level 8.	set logging application AAA level 8 servers 2
3	Enable console logging and file storage.	set logging local console enable file enable