Default System Parameters lists system parameter default values.
Parameter | Description | Default Value |
---|---|---|
IP Gratuitious ARP | Provides an ARP announcement packet containing valid sender hardware and protocol addresses for the host that sent it. | disabled |
System Utilization Threshold | Sets the threshold for sending CPU utilization notification messages. | 800 (80%) |
MTU | Sets the path MTU discovery protocol on the device. | enabled |
You must configure your S- K- or 7100-Series device with an IP interface and an IP address. You can also configure other system properties on the S- K- or 7100-Series device. See System Properties Configuration.
Task | Command |
---|---|
Set IP interfaces. You may specify an IP interface as the default management IP interface. | set ip interface interface-name [default] |
Set the system IP address, subnet mask and default gateway. If not specified, ip-mask will be set to the natural mask of the ip-address and ip-gateway will be set to the ip-address. If not specified, the first IP interface configured on a system becomes the default IP interface. |
set ip address ip_address [mask ip_mask] [gateway ip_gateway] [interface interface-name] |
Control the gratuitous ARP processing behavior. By default, gratuitous ARP is disabled. |
set ip gratuitous-arp [request | reply | both] |
Set the threshold for sending CPU utilization notification messages. A value of 0 will disable utilization notification messages. |
set system utilization threshold threshold |
Change the time of day on the system clock. | set time [mm/dd/yyyy] [hh:mm:ss] |
Enable or disable the daylight savings time function. | set summertime {enable | disable} [zone] |
Configure one of the following:
|
set summertime date start_month start_date start_year start_hr_min end_month end_date end_year end_hr_min [offset_minutes] set summertime recurring start_week start_day start_month start_hr_min end_week end_day end_month end_hr_min [offset_minutes] |
(Optional) Configure a name for the system. A name string containing a space in the text must be enclosed in quotes as shown in the example below. If string is not specified, the system name will be cleared. |
set system name [string] |
(Optional) Identify the location of the system. A location string containing a space in the text must be enclosed in quotes as shown in the example below. If string is not specified, the location name will be cleared. |
set system location [string] |
(Optional) Identify a contact person for the system. A contact string containing a space in the text must be enclosed in quotes as shown in the example below. If string is not specified, the contact name will be cleared. |
set system contact [string] |
(S-, K-Series) Set the alias, a text name, for a physical object. If string is not specified, the specified alias will be cleared. |
set physical alias {[chassis] | [backplane backplane] | [slot slot] | [module module] | sub-module slot module | [powersupply powersupply] | [powersupply-slot powersupply-slot] | [poe-powersupply poe-powersupply] | [fan fantray] | [fan-slot fantray] | [port port-string]} [string] |
(7100-Series) Set the alias, a text name, for a physical object. If string is not specified, the specified alias will be cleared. |
set physical alias {[chassis] | [module module] | [powersupply powersupply] | [powersupply-slot powersupply-slot] | [poe-powersupply poe-powersupply] | [fan fantray] | [fan-slot fantray] | [port port-string]} [string] |
Set the asset ID for a physical object. | set physical assetid {[chassis] | [module module] | [powersupply powersupply] | [poe-powersupply poe-powersupply] | [fan fantray]} string |
Disable or re-enable path MTU discovery protocol on the device. | set mtu {enable | disable} |
System Properties Management and Display Commands lists system properties management and display commands for S- K- and 7100-Series devices.
Task | Command |
---|---|
Display the gratuitous ARP processing behavior. | show ip gratuitous-arp |
Display system information, including contact information, power and fan tray status and uptime. | show system |
Display the system‘s hardware configuration. | show system hardware |
Display system resource utilization information. | show system utilization [cpu | process | storage] [slot slot] |
Display the current time of day in the system clock. | show time |
Display daylight savings time settings. | show summertime |
(S-, K-Series) Display the alias (a text name) for one or more physical objects. | show physical alias {[chassis] | [backplane backplane] | slot slot] | [module module] | sub-module slot module | [powersupply powersupply] | [powersupply-slot powersupply-slot] | [poe-powersupply poe-powersupply] | [fan fantray] | [fan-slot fantray] | [port port-string] |
(7100-Series) Display the alias (a text name) for one or more physical objects. | show physical alias {[chassis] | [module module] | [powersupply powersupply] | [powersupply-slot powersupply-slot] | [poe-powersupply poe-powersupply] | [fan fantray] | [fan-slot fantray] | [port port-string]} |
Display the asset ID for a physical object. The S- and K-Series support the module option. | show physical assetid {[chassis] | [module module] | [powersupply powersupply] | [powersupply-slot powersupply-slot] | [poe-powersupply poe-powersupply] | [fan fan] |
Display the status of the path MTU (maximum transmission transmission) discovery protocol on the device. | show mtu |
Display information about scheduled device resets. | show reset |
Display output for technical support-related commands. Optionally, you can write this output to a file. | show support filename |
Clear the IP interface. | clear ip interface interface-name |
Clear an IP address. | clear ip address ip-address |
Stop all gratuitous ARP processing. | clear ip gratuitous-arp |
Clear the threshold for sending CPU utilization notification messages. | clear system utilization |
Clear the daylight savings time configuration. | clear summertime |
Reset the alias for a physical object to a zero-length string. | clear physical alias {[chassis] | [backplane backplane] | slot slot] | [module module] | sub-module slot module | [powersupply powersupply] | [powersupply-slot powersupply-slot] | [poe-powersupply poe-powersupply] | [fan fantray] | [fan-slot fantray] | [port port-string] |
Reset the asset ID for a module to a zero-length string. | clear physical assetid {[chassis] | [module module] | [powersupply powersupply] | [powersupply-slot powersupply-slot] | [poe-powersupply poe-powersupply] | [fan fan] |
Reset the state of the path MTU discovery protocol back to enabled. | clear mtu |
Reset the device without losing any user-defined configuration settings or to display information about device resets. | reset {[mod | system] [cancel]} |
Reset an option module CPU. | reset nemcpu mod.nemcpu |
Schedule a system reset at a specific future time. This feature is useful for loading a new boot image. | reset at hh:mm [mm/dd] [reason] |
Schedule a system reset after a specific time. This feature is useful for loading a new boot image. | reset in hh:mm [reason] |
Clear all user-defined switch and router configuration parameters for one or all modules. | clear config mod_num | all |