Enabling CoS State

CoS state is a global setting that must be enabled for CoS configurations to be applied to a port. When CoS state is enabled, controls configured for CoS supersede port level controls for priority queue mapping, IRL, and TxQ. These port level settings can be configured independent of CoS state, but will have no affect while CoS is enabled. Disabling CoS results in the restoration of current port level settings.

Use the set cos state enable command to enable CoS state globally for this system.

Use the set cos state disable command to disable CoS state globally for this system.

Use the show cos state command to display the current status of CoS state.