Groups

Use this command to display SNMP group information. If no parameters are specified, all information about all groups is displayed.

show snmp group [groupname groupname] [user user] [security-model {v1 | v2c | usm}] [volatile | nonvolatile | read-only]

System(su)->show snmp group
Security model          = SNMPv1
Security/user name      = public
Group name              = groupRW
Storage type            = nonVolatile
Row status              = active
Security model          = SNMPv2c
Security/user name      = public
Group name              = groupRW
Storage type            = nonVolatile
Row status              = active
Security model          = USM
Security/user name      = admin1
Group name              = alladmin
Storage type            = nonVolatile
Row status              = active
Security model          = USM
Security/user name      = admin2
Group name              = alladmin
Storage type            = nonVolatile
Row status              = active