Example

This sample output from the show logging server command shows that two servers have been added to the device‘s Syslog server list. These servers are using the default UDP port 514 to receive messages from clients and are configured to log messages from the local1 and local2 facilities, respectively. Logging severity on both servers is set at 5 (accepting messages at severity levels 5 through 1). Using the commands described in the next section, these settings can be changed on a per-server basis, or for all servers.

System(rw)->show logging server
   IP Address     Facility   Severity     Description    Port     Status
-------------------------------------------------------------------------
 1 132.140.82.111 local1     warning(5)    default         514    enabled
 2 132.140.90.84  local2     warning(5)    default         514    enabled