Target Address Profiles

Use this command to display SNMP target address information. If no parameters are entered, information about all target address profiles is displayed.

show snmp targetaddr [targetAddr] [volatile | nonvolatile | read-only]

System(su)-> show snmp targetaddr
Target Address Name = Extremenetworks_user
Tag List            =
IP Address          = 172.29.10.1
UDP Port#           = 162
Target Mask         = 255.255.255.255
Timeout             = 1500
Retry count         = 3
Parameters          = matrix
Storage type        = nonVolatile
Row status         x= active