Configure the Distribution-tier Switch

Set the MultiAuth mode for the system

System(su)->set multiauth mode multi

Set the MultiAuth authentication mode for each port

System(su)->set multiauth port mode auth-opt ge.1.5-10,15-24

Enable RS on this system:

System(su)->set radius-snooping enable

Enable RS and set configuration for ports on this system (drop option supported by S- and K-Series)

System(su)->set radius-snooping port enable drop enabled authallocated 256 ge.1.5-10
System(su)->set radius-snooping port enable drop enabled authallocated 256 ge.1.15-24

Configure RS flow table entries

System(su)->set radius-snooping flow 1 10.10.10.10 50.50.50.50 1812 mysecret
System(su)->set radius-snooping flow 2 10.10.10.20 50.50.50.60 1812 mysecret

Configure RS timeout for this system

System(su)->set radius-snooping timeout 15